Tyres; Replacing Tyres; Adjust Tyre Pressure - Bosch KB069 RW Series Translation Of Original Operating Instructions

Table of Contents

Advertisement

6.5.8

Tyres

6.5.8.1 Replacing tyres

Not included in price
Different tyres need to be used when the area of
§
use is changed, more weight or greater puncture
protection is added, and greater acceleration or
more dynamic cornering is used.
Tyres are may only be replaced after approval by
the vehicle or parts manufacturer.
Tyres may be replaced if
They are approved for use on e-bikes
They comply with ETRTO dimensions
They have the same load capacity as a
minimum
They have a comparable level of puncture
protection as a minimum

6.5.8.2 Adjust tyre pressure

The correct tyre pressure largely depends on the
weight load on the tyres. This load is determined
by the pedelec's tare weight, the rider's body
weight and the luggage load.
Unlike cars, the weight of the vehicle has little
impact on the total weight. Moreover, the personal
preferences for low rolling resistance or a high
degree of suspension comfort vary a great deal.
It is important to remember that
the higher the tyre pressure is, the lower the wear,
rolling resistance and the risk of breakdown are.
The lower the pressure in the tyre is, the greater
the comfort and grip that the tyre offers is.
In the case of pedelecs used on the road, the rule
is the greater the tyre pressure is, the lower the
tyre rolling resistance is. The risk of breakdown is
also lower when the pressure is high. A
permanently excessively low tyre pressure often
leads to premature wear in the tyre. Cracking in
the side wall is a typical consequence of very low
tyre pressure. Abrasion is also unnecessarily
high.
On the other hand, a tyre can absorb road impacts
more effectively at a low pressure.
MY23K0a - 52_1.0_02.09.2022
As a general rule, wide tyres are operated at a
lower tyre pressure. They provide the option of
exploiting the advantages of the lower tyre
pressure without the serious disadvantages it
causes with regard to wear, rolling resistance and
breakdown protection.
Never exceed or go below the minimum and
maximum pressure limits indicated on the tyre.
1 Pump the tyre to the recommend tyre pressure.
Tyre pressure in bar for body
weight
Tyre width
approx. 60
kg
25 mm
6.0
28 mm
5.5
32 mm
4.5
37 mm
4.0
40 mm
3.5
47 mm
3.0
50 mm
2.5
55 mm
2.0
60 mm
2.0
Table 53: SCHWALBE recommend tyre pressure
Operation
approx. 80
approx.
kg
110 kg
7.0
8.0
6.5
7.5
5.5
6.5
5.0
6.0
4.5
6.0
4.0
5.0
4.0
5.0
3.0
4.0
3.0
4.0
130

Advertisement

Table of Contents
loading

Table of Contents