Excessively Hard Damping On Bumps - Bosch KB069 RW Series Translation Of Original Operating Instructions

9.2.10.4 Excessively hard damping on bumps

When the bike hits a bump, the fork deflects too
slowly and the wheel lifts up from the bump.
Traction decreases when the wheel no longer
touches the ground.
Figure 225: Excessively hard damping in the suspension fork on bumps
Solution
 Turn compression lever clockwise towards
OPEN.
R2C2-PCS
R2C2
RC2
RC2-PCS
1
Table 84: Low-speed lever (1) on the SR Suntour suspension fork on the fork crown
MY23K0a - 52_1.0_02.09.2022
RC-PCS
RC
1
Troubleshooting, fault clearance and repair
The headset and handlebars are deflected
upwards significantly, which can impair control.
 The damping and compression hardness
reduces and the deflection stroke speed is
reduced. Sensitivity to small bumps is
increased.
RLRC-PCS
RLRC
1
LORC-PCS
LORC
1
248