Rebounding Too Slowly - Bosch KB069 RW Series Translation Of Original Operating Instructions

9.2.10.2 Rebounding too slowly

The fork does not rebound quickly enough after
absorbing a bump. The fork also remains
deflected over subsequent bumps, which reduces
deflection and increases the hardness of impacts.
Available deflection, traction and control decrease
(blue line).
Figure 222: Suspension fork rebounding too slowly
Solution
 Turn rebound screw in an anti-clockwise
direction.
Figure 223: Example of SR SUNTOUR rebound screw (1)
MY23K0a - 52_1.0_02.09.2022
Troubleshooting, fault clearance and repair
The fork remains in a deflected state, causing the
headset and handlebars to move to a lower
position. Body weight is shifted forward after the
impact (green line).
 The rebound speed is increased (faster
return).
1
246