Separation Roller - Ricoh SAVIN D0AP Service Manual

Separation Roller

2.10 SEPARATION ROLLER
Before replacing the separation roller, reset the PM counter.
Turn the power ON and enter the SP mode.
1.
Execute the following SP corresponding to the part to be replaced to reset the PM
2.
counter.
- SP7-804-052 (Reset PM Counter: Spr. Bank1)
- SP7-804-054 (Reset PM Counter: Spr. Bank2)
- SP7-804-056 (Reset PM Counter: Spr. Bank3)
Turn the power OFF.
3.
Remove the paper cassette.
1.
Remove the inner cover [A] while pressing the two lock buttons in the paper tray.
2.
Raise the holder of the separation roller [A] and remove it.
3.
D3ER/D3EQ 18 SM