The Door Will Not Open; Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Cut - Miele PWM 509 GB Operating And Installation Instructions

Commercial washing machine
Table of Contents

Advertisement

Problem solving guide

The door will not open

Problem
The door cannot be
opened.
At the end of a programme
or when a programme is
cancelled, the following
appears in the display:
Cool down
Comfort cool-
or
ing
.
The following appears in
F -Door lock
the display:
fault. Call Service.

Opening the door in the event of a blocked drain outlet and/or power cut

 Disconnect the machine from the mains electricity supply.
There is a lever behind the detergent drawer panel which opens the access panel to the
drainage system.
The lever is provided in the companion pack/as an accessory for models with a locked
detergent drawer.
Remove the lever.
46
Cause and remedy
The door is locked during the wash process.
Touch the Start/Stop sensor control.
Programme cancellation
Select
The door will unlock and you will be able to pull it open.
There is still water in the drum and the washing machine is
unable to drain.
Clean the drainage system as described under "Opening
the door in the event of a blocked drain outlet and/or
power cut".
To protect the user against scalding, the door cannot be
opened if the suds temperature is higher than 55 °C.
Wait until the temperature in the drum has decreased
and the message has gone out in the display.
The door lock has jammed.
Contact the Miele Customer Service Department.
Add laundry
or
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pwm 511 gb

Table of Contents