Table of Contents
Advertisement
Installing the washing machine
The washing machine must be installed by Miele Customer Service
Department or by an authorised dealer. Please observe the inform-
ation on the installation plan.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
To avoid the risk of frost damage, the machine must not be located
in rooms which may be subject to very low temperatures.
Transport the machine on a pallet truck inside the room.
Machines with feet must not be pushed to move them.
This could damage them.
Remove the packaging carefully with a suitable tool.
Lift the machine off the pallet using a lifting device.
Securing the machine
The feet of the washing machine must be secured to the floor using
the fixtures and fastenings supplied.
The fastenings included are for bolting the machine to a concrete
floor. For other types of flooring, please purchase suitable fastening
materials separately.
General operating conditions
This washing machine is intended only for use in a commercial envir-
onment and must only be operated indoors.
Ambient temperature in installation room: 0 °C to 40 °C
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibrations may occur.
Tip: Have the installation site inspected and seek the advice of a spe-
cialist in instances where increased noise may cause a nuisance.
Installation
53
Advertisement
Table of Contents
