Special features in the programme sequence
Final spin speed
Rinse-spin
36
Spinning
When a programme is selected, the maximum spin speed for this
wash programme is shown in the display in the pre-start menu.
You can reduce the final spin speed.
Depending on the programme, it may also be possible to increase the
speed. The setting options are displayed when you tap the spin
speed.
There is a spin cycle after the main wash and between the rinse
cycles. A reduction in the final spin speed will also reduce the interim
spin speed as appropriate.
Anti-crease
At the end of the programme, the drum continues to turn at intervals
for up to 30 minutes to help prevent creasing.
The machine cannot be opened until the programme has ended.
Anti-crease is programme-dependent and the option can be
switched on or off in the supervisor level.