Operating Instructions - Maytronics Ozone Swim Twin Series User Manual

1 6

Operating Instructions

Salt/ Mineral Requirements
All Ozone Swim units require 3,500-4,500ppm salt/mineral levels.
Using only refined swimming pool salt or minerals, add the desired
quantity to the swimming pool water. To assist in the rapid dissolving and
mixing, sweep or brush the solids until they are fully dissolved.
Note: Undissolved salt may result in staining of your pool's interior walls.
Achieving the correct salt/mineral levels
For best results, the salt concentration in the pool water is required to be
within an average range of approximately 3,500 to 4,500ppm. Check salt/
mineral supplier's guide for achieving correct ppm.
Existing Pools
To establish the salt level in an existing pool, take a water sample to your
local pool shop for testing, they will tell you the current salt/mineral levels
(TDS) and advise the correct course of action required.
New Pools
• It is essential that the new pool is balanced correctly. Consult your
pool builder on how do this or Maytronics can provide information to
do this.
• You can find the water chemistry parameters on p. 21 of this manual.