Recall button timing
In some advanced PBX systems the recall timing may require adjustment. In
normal domestic use, this setting should not require changing.
The normal setting is 100 ms.
1. Press and hold
2. Press
.
R
3. The current setting will be displayed
( S=100 ms, L=300 ms/600ms AU/NZ).
to select the required setting .
4. Press
R
5. Press
to save.
º
Tone/pulse dialling (UK only)
You can select either tone or pulse dialling, the standard setting is tone. In
normal domestic use this setting should not require changing.
1. Press and hold
2. Press
.
7
3. The current setting will be displayed (P=pulse, T=tone).
to select the required setting .
4. Press
R
5. Press
to save.
º
Reset handset defaults
An individual handset can be reset to the original factory default condition.
1. Press and hold
2. Press
.
9
3. Enter the units PIN number (0000 for this model).
to save .
4. Press
º
www.doro.com
Settings
until P is displayed on the handset.
º
until P is displayed on the handset.
º
until P is displayed on the handset.
º
English
15