Kärcher Sensor 2 Operating Instructions Manual page 15

27
28
7
This vacuum cleaner has a brush jammed
indicator (27). If the brush is jammed or overloaded
the machine will automatically switch-off and the
orange indicator shows in the display (36). If this
36
occurs, unplug the machine and clear the obstruction.
ALWAYS unplug from the mains socket before
dismantling any part of the machine.
To use the attachment tube (7) or hose (6) put the
machine in the upright position, then lift the tube from
the machine and stretch out the hose until it locks.
When the tube is returned to the machine, ensure it is
pushed down over the projection (35) on the housing.
6
The hose (6) can be used on its own. Push the
button (28) on the backside of the tube (7) and
18
extracted the hose (6) out of the tube (7). After using
put the hose back into the tube. The attachments
17
(17,18) fit either to the end of the hose or the end of
the tube.
When using accessory tools, keep floor brush off
carpet by keeping handle in locked position and
lowering handle with one hand to raise brush off
floor. Operate accessories with other hand.
86400000 - Sensor 2
Operations
15