Start-Up Checks; Low Oil Pressure-Alert - Yamaha FL250A Owner's Manual

1
1. Set button
2. Mode button
3
6 7
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection-alert indicator
5. Engine trouble alert/maintenance indicator
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
EMU36110

Start-up checks

Place the remote control lever in neutral and
turn the main switch to "
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator-alert indicator blinks, consult your
Yamaha dealer immediately.
2
ZMU05417
1 4 5 2
8 9
ZMU05418
" (on). After all the
Instruments and indicators
TIP:
To stop the buzzer, press the "
" " (mode) button.
EMU36130

Low oil pressure-alert

If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indicator
blinks. Check the engine oil quantity and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil
quantity is maintained, consult your Yamaha
dealer.
ECM01601
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
" (set) or
ZMU05430
ZMU05431
32