Remote Control Transmitter (If Equipped); Receiver (If Equipped); Yamaha Security System Lock And Unlock Mode (If Equipped) - Yamaha F115A Owner's Manual

Components
EMU38592
Remote control transmitter (if
equipped)
The lock and unlock modes of the Yamaha
Security System are selected using the re-
mote control transmitter. While the engine is
running, input from the remote control trans-
mitter is not received.
Store the remote control transmitter carefully
so it will not be lost.
ECM02101
NOTICE
 The remote control transmitter is not
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
 Keep the remote control transmitter
away from high temperatures and do
not place it in direct sunlight.
 Do not drop the remote control trans-
mitter, subject it to strong shocks, or
place any heavy items on it.
 Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
27
ZMU06455
the transmitter
 Do not attempt to disassemble the re-
mote control transmitter yourself. Oth-
erwise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer.
 If you have lost the remote control trans-
mitter, consult your Yamaha dealer.
Keep the least 2 transmitters at all the
time. If you have lost both transmitters,
consult your Yamaha dealer.
TIP:
 Since the receiver is programmed to rec-
ognize the internal code from this transmit-
ter only, the security system setting can
only be changed with this transmitter. If the
remote control transmitter does not oper-
ate properly, contact a Yamaha dealer.
 Replace the battery cell after 1 year, and
every two years thereafter as a standard
measure.
 Refer to local hazardous waste regulations
when disposing of transmitter batteries.
 The Yamaha Security System permits to
register up to 5 remote control transmit-
is
ters. Consult your yamaha dealer for de-
tails.
EMU38602

Receiver (if equipped)

The receiver control the ECM (Electronic con-
trol module) to prevent the engine from start-
ing. Consult your Yamaha dealer for
installation of the receiver.
EMU38612
Yamaha Security System lock and un-
lock mode (if equipped)
The Yamaha Security System settings are se-
lected by pressing the lock or unlock button
on the remote control transmitter briefly.