Westfalia 92 86 29 Original Instructions Manual page 31

Cleaning
When using water-soluble coating material, simply clean all parts of the air
spray gun thoroughly with water.
Intensive Cleaning
Please note that disassembling and

intensive cleaning of the spray gun are
inevitable, as otherwise it can lead to
debris and to a bad spray result, if
lacquer and priming coats are used as
coating material.
Clean the spray gun and the paint

container after each use with appropriate
paint thinners or cleaning agents. Empty
the contents. Fill a little paint thinner into
the paint container and rinse it. Empty
the paint container and repeat the
process with clean paint thinner. Spray
the clean paint thinner in short strokes.
During cleaning please always wear a respirator mask and solvent-

resistant gloves! Also wear eye protection, as splashes of solvents can
cause injuries of your eyes.
Never put the paint spray gun into solvents for a longer period of time

or overnight.
Never use hard or sharp objects to remove paint residues. The nozzle

must always be kept clean. Debris of dried paint can distort the paint jet
and damage the spray gun.
Rinse all parts well after intensive cleaning and dry the spray gun.

Assemble the gun. Fill a small amount of paint thinner into the paint
container and blow it with compressed air through the spray gun.
Maintenance and Care
 To ensure proper functionality and a long lifetime, diligent lubrication
and maintenance are essential.
 Use a suitable silicone free grease to grease all moving parts of the
spray gun as well as the thread of the paint flow regulator (1c) and the
1) Gravity Spray Gun
27