Westfalia 92 86 29 Original Instructions Manual page 26

 Always wear personal safety equipment when using the spray
gun. Toxic fumes and certain materials can be poisonous. Those
materials may create irritation or be otherwise harmful to health.
Follow the recommendations shown on the signs or written on
the data sheets. Always wear a respiratory protection. The safety
class of the system has to be in accordance with the processed
materials. Always wear safety gloves when processing varnish or
when cleaning the unit. We suggest wearing ear and eye protec-
tion when operating the spray gun.
 Do not spray any material if you do not know whether it is
potentially dangerous. Unknown materials could cause danger-
ous conditions.
 Keep your hands and other body parts out of the spray jet. If the
spray jet pierces the skin, seek medical assistance immediately.
The sprayed material can even penetrate through a glove and
into the skin and thus into your body.
 Do not treat such a penetration injury like a normal cut. A high-
pressure jet can inject toxic materials into the body and cause
serious injuries. In the event of a chemical penetration of the skin,
seek medical assistance immediately.
 Please keep in mind that the spray gun causes strong vibrations
which can lead to repetitive strain injuries in some cases. Keep
sufficient rests.
 Keep your working area tidy. Only take as much paint and thinner
to your working area as required for completing the job. Do not
keep paint and thinners in open containers; store them in a safe
place which is not easily accessible to others.
 During painting no ignition source (e.g. open flames, lid ciga-
rettes, lamps not protected against explosion etc.) may be pre-
sent, because during painting explosive gases may be formed.
 Solvents and coating materials can be easily inflammable or
combustible if they are spilled or sprayed. Always follow the
warnings and safety information of the paint or solvent manufac-
turers.
Safety Notes
22