English
A5E51354373-AA
Wiring of the IM 152-1PN interface module
• When laying cables, make sure that you adhere to the
installation regulations according to EN 60079-14 and any
regulations specific to your country.
• Connect the fiber optic cables to the optical ports of the
interface module. For more information, refer to the
SIMATIC Distributed I/O ET 200iSP manual.
• When using the IM 152-1PN interface module, observe the
limit values of Class 1 according to IEC 60825-1. Only use
suitable media converters and optical fiber cables.
High-energy optical radiation (laser) can be the cause of
an ignition source.
Mounting
• Check the electronic module for damage! You may only
plug undamaged electronic modules onto the Terminal
Module.
• When you first insert an electronic module, the coding
element engages into the Terminal Module. This prevents
the wrong module being inserted. This mechanical coding
must not be changed.
English