Residual Risks; Initial Start-Up; Mounting The Bow-Type Handle; Fitting The Wheels - Parkside PVKO 50 A1 Translation Of The Original Instructions

parts must be carefully examined in
respect of their proper and intended
function.
- Check whether the moving parts
are working properly and are not
becoming jammed or whether parts
are damaged. All parts must be cor-
rectly fitted and satisfy all conditions
to ensure the proper operation of
the power tool.
- Damaged safety equipment and
parts must be repaired properly or
replaced by an authorised specialist
workshop unless otherwise indicat-
ed in the instruction manual.
- Do not use power tools if the switch
cannot be turned on and off. Dam-
aged switches must be replaced at
a customer service workshop.
• Caution!
Using other attachment tools and other
accessories may represent a risk of in-
jury to you.
• Have your power tool repaired
by a qualified electrician. This
power tool complies with the relevant
safety regulations. Repairs may only
be performed by a specialist workshop
using original spare parts; otherwise
accidents involving the user may result.
• If the connection cable of this device is
damaged, it must be replaced by the
manufacturer or their customer service
or by a similarly qualified person in
order to avoid hazards.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Eye damage if suitable eye protection
is not worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.

Initial start-up

Mounting the bow-type
handle
1. Push the bow-type handle (7) into the
bracket for the bow-type handle (10a)
on the pressure vessel (10).
2. Attach the bow-type handle (7) using
the hexagon socket screws and the en-
closed Allen key (15).

Fitting the wheels

1. Insert the wheel bolt (17) through the
hole in the wheel (11).
2. Insert the wheel bolt (17) through the
hole in the wheel rod.
3. Fasten the wheel (11) using the locknuts
(19). If necessary, use a spanner (not
included in delivery).
GB IE
19