Checking The Safety Valve; Storage; Transport; Disposal/Environmental Protection - Parkside PVKO 50 A1 Translation Of The Original Instructions

1. Open the drain plug (12).
2. Collect the condensation water in a
suitable container.
3. Tilt forward slightly to let out the re-
maining condensation water.
4. Close the drain plug (12) again.

Checking the safety valve

The safety valve is used to release the pres-
sure in case of overpressure in the pressure
vessel.
Activate the safety valve approx. every 30
operating hours, or at least 3 times a year
to ensure correct functioning.
1. Start the device (see "Switching On/
Off".
2. Rotate the safety valve (3) clockwise in
order to open the safety valve (). The
safety valve (3) should now release air.
3. Turn the safety valve (3) anti-clockwise
to close the safety valve (3) again.

Storage

• Always store the devices and accesso-
ries:
- dry.
- clean.
- dust free.
- out of the reach of children.
• Wind the power cable (9) around the
power cable bracket (19).
• Wind the compressed air hose (15)
around the hose reel (8).
• Place the device upright if necessary.
• Release the overpressure in the com-
pressor by switching off the compressor
and using up the compressed air still
present in the pressure vessel (10).
• Drain the condensation water (see
("Draining the condensation water").

Transport

Use the bow-type handle (7) to move the
device. Pay attention to the weight of the
device during transport.
Disposal/environmental
protection
The device, accessories and packaging
should be properly recycled.
Electrical devices do not belong in
domestic waste.
• Take the device to a recycling plant.
The plastic and metal parts used on
your device can be properly sorted
according to materials and grades and
efficiently recycled. Please contact our
service centre for more information.
• We will dispose of any defective devic-
es that you send to us free of charge.
Replacement parts/
Accessories
Spare parts and accessories can
be obtained at
www.grizzlytools-service.eu
If you have issues ordering, please use the
contact form.
If you have any other questions, contact
the "Service-Center" (see page 23).
GB IE
21