Safety Instructions; Symbols And Icons; General Safety Instructions For Power Tools - Parkside PVKO 50 A1 Translation Of The Original Instructions

which the power tool is used.
Try to keep the exposure to vibrat-
ions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the device.

Symbols and icons

Symbols in the manual:
Warning symbols with infor-
mation on damage and inju-
ry prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the device
Caution!
Danger of electric shock!
Warning! Compressor system can
start without warning.
Caution! Hot surface!
Wear ear protection!
Read the instruction manual careful-
ly.
Electrical devices do not belong in
domestic waste.
Sound power level L
dB
General Safety Instructions
for Power Tools
The term "power tool" used in the safe-
ty instructions refers to mains-operated
electric tools (with a mains cable) and to
battery-operated electric tools (without a
mains cable).
Safe working:
• Keep your work area tidy.
An untidy workplace can lead to acci-
dents.
• Consider environment influenc-
es.
- Do not expose power tools to rain.
- Do not use power tools in damp or
wet surroundings. The penetration of
water into an electric tool increases
the risk of electric shock.
- Ensure the work area is adequately
lit.
- Do not use power tools where there
is a fire or explosion hazard. Power
tools generate sparks that can ignite
dust or vapours.
• Protect yourself against electric
shock.
GB IE
indicated in
WA
17