Table of Contents
Advertisement
ASSEMBLY
Handle
Unfold handle carefully so as not to pinch
or damage control cables.
1. Raise handles until lower handle section
locks into place in mowing position.
2.Remove protective padding, raise upper
handle section into place on lower handle
and tighten both handle knobs.
Mount the front wheel
1. Insert the two screws from the inside through the recesses on the front sheet
steel housing.
2. Fix the front wheel with the two washers and nuts.
3. Attach the front wheel to the top of the lawnmower housing with the nuts and
bolts.
Instruction for grass bag assembly
Before using the grass catcher, the side discharge must be removed.
Pull plastic loops over basket rods.
09
Advertisement
Table of Contents
