Husqvarna FE 350 2023 Owner's Manual page 44

Table of Contents

Advertisement

10 SERVICE SCHEDULE
Perform engine service including removing and installing the engine. (Change the
spark plug and spark plug connector. Change the piston. Check/measure the
cylinder. Check the cylinder head. Change the valves, valve springs, and valve
spring seats. Check the camshaft and cam lever. Change the connecting rod,
conrod bearing and crank pin. Change the radial shaft seal rings of the water
pump. Check the transmission and the shift mechanism. Check the oil pressure
control valve. Change the suction pump. Check the force pump and lubrication
system. Check the timing assembly. Change the timing chain. Change all engine
bearings. Change the freewheel.)
One-time interval
Periodic interval
42
Every 70 operating hours when used for motorsports
After 20 operating hours
After 10 operating hours
every 48 months
every 12 months
Every 135 operating hours

Advertisement

Table of Contents
loading

This manual is also suitable for:

3402637en

Table of Contents