Installation; Order Codes - Parker 2003-CB-00 Technical Manual

6 Installation

Terminal covers, main covers, and cover fixings must remain in place
These should only be removed once the supply to the unit and/or system
has been disconnected, and the residual energy in the DC link capacitors
Take ESD precautions when handling the Communication Interface
Option Cards to avoid any risk of damaging the equipment.
All activities covered in this chapter should be carried out when there is no power to the inverter.
•
If the drive has been powered up, ensure enough time has elapsed that the inverter has discharged
•
its residual energy.
Always check that the voltages on the user terminals are at a safe level (<50V) before carrying out
•
any of these activities.

6.1 Order Codes

Order Code
2003-CB-00
2003-EC-00
2003-IP-00
2003-PB-00
2003-PN-00
2003-RS-00
DANGER!
RISK OF ELECTRIC SHOCK
while the drive is energized.
has been discharged.
CAUTION!
ESD SENSITIVE EQUIPMENT
Description
CANopen communication interface option card
EtherCAT communication interface option card
Ethernet IP communication interface option card
Profibus DP-V1 communication interface option card
PROFINET IO communication interface option card
RS485 Modbus RTU communication interface option card
DOC-0017-06-EN-B 04.04.2023
DOC-0017-06-EN: AC20 Series CANopen Option
9 (47)