Masport 215 Series Owner's Manual page 19

15. Put the Drip tray (item 18), Grease cup (item 19) into the grill body and 2pcs Step screw (item e) - (the step screws will be on the
assembly already) to the rear of the grill body to secure the drip tray.
NOTE:
Some barbecue models require the stepped screws (item e) are removed to insert the drip tray. Once the tray is positioned
correctly, refit step screw (item e).
16. Insert the wiring plug of transformer into the bottom of the transformer connector. And then fasten the nut by turning clockwise. The lead from the
Transformer to the lights is to be routed on the outside of the BBQ Cabinet. It is designed to be just long enough in length to do this (will be too
short if routed on the inside of the Cabinet).
17. Insert the wiring plug of USB into the USB port (if included in your model of BBQ).
18. Connecting the ignition wire/ wires to the electronic module
548948.A.3 - Masport 4/6 Burner 215 Series June 2021
19
PANTONE 648C