Setting Up the Reader
Attaching and Retaining the USB Cable (GFS4520
Model Only)
1. While pressing the retainer's locking wings, slide to
pull it out of its housing.
2. Rotate the retainer clockwise and insert the USB
cable.
3. Set back the retainer by rotating it counterclockwise
and push until the cable is firmly locked.
NOTE: Different microUSB cable sizes can be used.
Ensure the connector shell size does not exceed
18.0 mm (w), 7.0 mm (h), 10.8 mm (d). Use only
straight USB connectors, do not use right-angled
connectors.
4
GRYPHON™ I GFS4500
1