Declaration Of Conformity - Finish Thompson PF Series Operation-Installation-Parts Manual

Finish Thompson Inc. hereby declares that the following machine(s) fully comply with the applicable health and safety
requirements as specified be the UKCA Directives listed. The product may not be taken into service until it has been
established that the drive motor for the Drum and Container Pump complies with the provisions of all relevant UKCA
Directives. The complete product complies with the provisions of the UKCA Directive on machinery safety provided motors
manufactured by Finish Thompson Inc. are used.
This declaration is valid provided that the devices are fully assembled and no modifications are made to these devices.
The Supply of Machinery (Safety) Regulations 2008 (UKSI 2008 No. 1597)

Declaration of Conformity

Type of Device:
Drum and Container Pump Tubes/Accessories
PFM-27/40/48/54/60
PFP-27/40/48/54/60/72
PFV-27/40/48/54/60/72
Nozzles (111030)
UKCA Directives (and their applicable amendments):
Applied Designated Standards:
EN ISO 12100:2010
EN 809:1998+A1:2009+AC:2010
Manufacturer: Finish Thompson Inc.
921 Greengarden Road
Erie, Pennsylvania 16501-1591 U.S.A
Product Engineer
Models:
Signed,
31 May 2023
3