Code Approval - Bellfires Vertical Bell Medium Tunnel 3 LF Operating Manual

IMPORTANT SAFETY INSTRUCTIONS
23. DO NOT use the appliance if any part has been exposed to or has been under
water. Immediately call a qualifi ed service technician to inspect the appliance and
replace any part of the control system and any gas control which has been
submerged in water.
24. DO NOT operate the appliance if any log is broken.
25. The installation must conform with local codes or, in the absence of local codes,
with the Natural Gas and Propane Installation Code, CSA B149.1.
26. This appliance, when installed, must be electrically grounded in accordance with
local codes or in the absence of local codes, with the Canadian Electrical Code,
CSA C22.1.
27. The appliance is equipped with a patented safety system, whereby the door
(front glass frame) will extract any over-pressure that arises in a controlled way.
In this, the door will briefl y open. A safety strip limits the maximum degree to
which the door can be tilted.
immediately close the gas tap and call a qualifi ed service technician.
To avoid any possible personal harm when the door opens due to an
over-pressure, always maintain a minimum distance of 40 in (100 cm) to the
appliance, when igniting and when burning.
WARNING:
This gas is commonly known as well-headed gas.

CODE APPROVAL

Direct Vent type appliances draw all combustion air from outside of the dwelling through
the vent pipe.
These appliances have been tested by CSA and found to comply with the established
standards for VENTED GAS FIREPLACES in Canada as follows:
- ANSI Z21.88-2014 / CSA 2.33-2014 Vented Gas Fired Heaters.
- CSA P4.1 - 09 Testing method for measuring annual fi replace effi ciency.
A mobile home OEM installation must conform with the Standard for Gas Equipped
Recreational Vehicles and Mobile Housing, CSA Z240.4.
Bellfi res
This may cause a loud noise. If this happens,
Never connect unit to private (non-utility) gas wells.
LISTED VENTED GAS FIREPLACES
Vertical Bell Medium Tunnel 3 LF tested to:
7 Instructions for use