Bosch D9412GV3 Program Entry Manual page 68

D9412GV3/D7412GV3 | Program Entry Guide | 2.0
L## Master Arm Delay
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
2 Master Arm
Delay
Master arms areas based on the CC# Scope of the
keypad using an exit delay time.
When this item is accessed through the Function List,
Master Arm All allows the user to arm all areas
according to the authority level of the user and within
the CC# Scope of the keypad using an exit delay
time.
Arm Area arms only the area displayed. If
COMMAND 1 is used, it arms only the area where
the keypad is assigned.
L## Master Arm Instant
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
3 Master Arm
Instant
This authority level permission allows a user to
execute the Master Arm Instant function. Refer to
Master Arm Instant on page 60.
Arm Area arms only the area to which the keypad is
assigned.
If COMMAND 11 is used, it arms only the area where
the keypad is assigned.
Use COMMAND 11 carefully because all
Perimeter and Interior points become
Instant Armed.
L## Perimeter Instant
Default: Refer to the program record sheet
Selection: - or E
Function Function Name
No.
4 Perimeter Instant
Arm
Instant arm all Perimeter points, including Delayed
points, only in the area where the keypad is
assigned.
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
Panel and Area Wide Parameters
L## Perimeter Delay
Default:
Selection:
Function
Alternate
No.
Keystroke
5
[COMMAND][1]
Delay arm all Perimeter Delay point responses only
in the area where the keypad is assigned.
L## Watch Mode
Default:
Selection:
Function
No.
6
Initiate the Watch Mode in the area to which this
keypad is assigned.
L## Perimeter Partial
Default:
Alternate
Selection:
Keystroke
Function
[COMMAND][1][1]
No.
7
Partially arms only the area where the keypad is
assigned.
L## View Area Stat
Default:
Selection:
Alternate
Keystroke
Function
[COMMAND][2]
No.
8
View the current arm or disarm status and the not
ready to arm status of all areas within the scope of
the keypad in this area. The user needs arming and
disarming authority.
Get other manuals https://www.bkmanuals.com
Refer to the program record sheet
- or E
Function Name Alternate
Keystroke
Perimeter Delay [COMMAND][3]
Arm
Refer to the program record sheet
- or E
Function Name Alternate
Keystroke
Watch Mode [COMMAND][6]
Refer to the program record sheet
- or E
Function Name Alternate
Keystroke
[COMMAND][8]
Perimeter Partial
Arm
This function ignores the A# Force
Arm/Bypass Max entry in Area
Parameters.
Local Only Reporting: No Closing
Report is sent to the central station, but a
Perimeter Delay Closing Event is
generated in the event log.
Refer to the program record sheet
- or E
Function Name Alternate
Keystroke
View Area Status (Menu function
only)
EN | 68