Bosch D9412GV3 Program Entry Manual page 121

D9412GV3/D7412GV3 | Program Entry Guide | 4.0
Default: 0
Selection: 0 to 24, 28, 29
Access Authority Events
22
Off: The control panel can log
Access Granted Events when
a valid token, RTE, REX, or
Unlock Door Event is detected
for a specific door. These
events can be directed to print
at a local printer or send a
report remotely through phone
routing. This sked disables
Access Granted Events to be
reported for Door #.
No Entry Events On: The
23
control panel can log No Entry
Events when an invalid token
is detected for a specific door.
No Entry Events include No
Entry-Secured, No Entry-
Interlock, No Entry-Unknown
ID, and No Entry-Level. These
events can be directed to print
at a local printer or send a
report remotely through phone
routing. This sked enables No
Entry Events to be reported for
Door #.
No Entry Events Off: The
24
control panel can log No Entry
Events when an invalid token
is detected for a specific door.
No Entry Events include No
Entry-Secured, No Entry-
Interlock, No Entry-Unknown
ID, and No Entry-Level. These
events can be directed to print
at a local printer or send a
report remotely through phone
routing. This sked disables No
Entry Events to be reported for
Door #.
28 Expanded Off-Normal Test Report: To generate this event, one or more points must be in an off-
normal state at the time the sked executes. In addition, any system trouble that is active also
generates an Expanded Off-Normal Test Report. Expanded Off-Normal Test Reports include the Off
Normal Test Report Event as well as the supplementary event at the time the report is generated.
The Event Log shows only a Test Report Event.
If none of these conditions exists at the time the sked executes, only a Sked Executed Event is
generated and the Off-Normal Test Report is not sent.
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
Schedules (Skeds)
S## Door 1 [through 8]
Default: No
Selection: Yes or No
This parameter disables the sending
of Access Granted Events for Door #.
S## Door 1 [through 8]
Default: No
Selection: Yes or No
This parameter enables the sending
of No Entry Events for Door #.
S## Door 1 [through 8]
Default: No
Selection: Yes or No
This parameter disables the sending
of No Entry Events for Door #.
Get other manuals https://www.bkmanuals.com
EN | 121
Yes Disable the
sending of Access
Granted Events
for Door #.
Do not disable the
No
sending of Access
Granted Events
for Door #.
Yes Enable the
sending of No
Entry Events for
Door #.
No Do not enable the
sending of No
Entry Events for
Door #.
Yes Enable the
reporting of No
Entry Events for
Door #.
Do not enable the
No
reporting of No
Entry Events for
Door #.