Toshiba MCY-MUG0401HSW-E Service Manual page 57

2
Each time [ ] [
cyclically. Select the indoor unit to change settings for.
• The fan of the selected indoor unit runs . The indoor unit can be confirmed for which to change settings
3
Push OFF timer button to confirm the selected indoor unit.
4
Push the menu button to make Code No. [04] flash. Change Code No. [04] with [
button.
5
Push the menu button to make Set data [0001] flash. Change Set data [0001] with [
button.
Priority set 0001
6
Push OFF timer button to complete the set up.
• To change other settings of the selected indoor unit, repeat from Procedure
7
When all the settings have been completed, push ON/OFF button to finish the settings.
(Return to the normal mode).
" " flashes and then the display content disappears and the air conditioner enters the normal stop mode.
(The remote controller is unavailable while "
• To change settings of another indoor unit, repeat from Procedure
] setting button is pushed, indoor unit numbers in the group control change
Set data
No priority set 0000
Code No.
" is flashing.)
1
.
56
] [ ] setting
] [ ] setting
4
.