Toshiba MCY-MUG0401HSW-E Service Manual page 50

When switching from the wired remote controller
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setup while the air conditioner is not working.)
<RBC-ASCU11*>
1
Push and hold menu button and [
• After a while, the display flashes as shown in the figure. "ALL" is displayed as outdoor unit numbers during
initial communication immediately after the power has been turned on.
2
Each time [ ] [
cyclically. Select the outdoor unit No."U- 1" to change settings for.
• The fan of the selected outdoor unit runs. The outdoor unit can be confirmed for which to change settings.
3
Push OFF timer button to confirm the selected outdoor unit.
3,6
4,5
] setting button simultaneously for 10 seconds or more.
Outdoor unit No.
] setting button is pushed, outdoor unit numbers in the group control change
Set data
2,4,5
1 7
Code No.
49