Toshiba MCY-MUG0401HSW-E Service Manual page 236

No. Component
14 PMV coil
15 Fan guard
Procedure
1. Detachment
1)Remove the Front panel , Upper panel and Side
panel. [Step.1 - Step.3]
2)Remove the Connector of PMV coil from the
interface P.C. board. CN300:PMV coil (6P:white)
3)"Remove the lead wire from the lead wire clamp
and the banding band. (Fig. 14-1)
4)Rotate the coil, and remove PMV coil. (Fig. 14-2)
2. Attachment
1) Install it in the reverse of the procedure to
remove it.
CAUTION
Be sure to fix the lead wire with a banding band
on the market.
Match the positioning extrusion of the coil
surely to the concavity of PMV body to fix it.
1. Detachment
1)Remove the Discharge cabinet.[Step.2]
CAUTION
For scratch protection, work on a carton box,
cloth, or the like.
2)Remove the Screws of the Fan guard.
(screw:M4 x 10 , 4 pcs. Fig. 15-1)
3)Remove the hook of the Fan guard by pushing it
with a flat-head screw driver or the like. (Fig. 15-2)
4)Remove the fan guard from the discharge cabinet.
2. Attachment
1) Insert the upper protrusion of the Fan guard into the
square hole of the discharge cabinet, and insert the
hook. Push the hooks (4 positions) with your hand
to fix them.
CAUTION
Confirm that all the Hooks are securely fixed to
specified positions.
235
Remarks
Fig. 14-1
PMV coil
PMV body
Fig. 14-2
Screws Hooks
(4 positions) (4 positions)
Fan guard
Fig. 15-2
Fig. 15-1
CN300
Lead wire
clamp
Banding
band