Vankyo LEISURE 3W PRO User Manual page 12

3) Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your iOS device
and search for the projector.
4) Select ZYCast-xxxx (icast) from the searching list to connect.
5) The contents on your iOS device will be mirrored to the wall/screen.
Screen mirroring for Android system
To activate this function, please make sure your Android device supports Multi-
screen/Wireless display. Names may be different from on Android device to another.
1) Turn on the Wi-Fi switch on your Android device.
Note: Successful Wi-Fi connection is not a must, but please make sure the Wi-Fi switch
on your Android device is ON.
2) Go to Homepage > Miracast to enter the following interface.
3) Activate Multi-Screen function on your Android device and search for the projector.
4) Select ZYCast-xxxx (mcast) from the searching list to connect.
5) The contents on your Android device will be mirrored to the wall/screen after a
successful connection.
Note: For screen mirroring through wired connection, please prepare an extra
Lightning/Micro USB/Type-C to HDMI adapter to connect your mobile device with the
projector.
Notes:
1. Due to copyright restrictions of Hulu, Netflix and similar services, the contents
cannot be mirrored to cast.
2. If the projected image freezes, check the network connection, or reboot the
projector, then go to Homepage > Setup > Advanced > Restore Factory Default
and select Confirm to do a reset on the projector.
3. The fluency of screen mirroring will be affected by the network connection. A
bandwidth of 100 Mbit or more is recommended when using screen mirroring.
4. Make sure your mobile device is close to the projector when using wireless
connection. A distance within 3ft is recommended.
5. Some mobile devices may not support screen mirroring due to the compatibility.
Settings
Go to Homepage > Setup to enter the following interface, then press
through menu options including Network, Projection, Advanced and Information and
preview their corresponding submenu lists. Press
press to return to the main menu bar.
1. Network
Go to Wi-Fi > Scan to search and connect the projector to your router's Wi-Fi.
to enter a certain submenu and
12
/ to toggle