Parts Checklist; Care And Maintenance - Time4Sleep MAYA Manual

Parts Checklist

Ref. Description
1 Headboard
2 Footboard
3 Side Rail - LH
4 Side Rail - RH
5 Metal Lift Up Slat Frame
6 Metal Connection Plates
7 Slat Frame Cross Bar
8 Angled Corner Brackets
9 F a b c i r B a e s C v o
Fittings Checklist
Code Description
A
13
B
3&4
Bolts (M8x16mm) for
fitting frame support brackets (11)
to headboard and footboard;
C
fitting angled corner bracket (8);
fitting metal connection plate (6)
and slat frame cross bar (7) to
metal slat frame (5)
Care & Maintenance
In the unlikely event of missing or damaged parts,
please contact your retailer. Please have this guide at
hand quoting the part code reference numbers shown
when requesting spare or replacement parts.
Warnings
NOTE: Before moving the slat frame, place the mattress on the slats. Without a mattress in place, the
speed of movement is quick and may cause injury so great care is needed.
Carefully lower the frame with the fabric hand-strap (10) ensuring the frame sides are aligned with the side
panels; there should be an even gap on each side.
If not aligned, check bed is still square (see Stage 3) and if it is, but gaps are still not even, re-align.
Depending on the weight of the mattress, the rising speed will vary so be careful until you get used to the
speed.
Always use the hand-strap to lift or lower the frame - keep fingers well away from the moving parts.
When fully assembled and the mattress in position, please raise & lower the ottoman 4/5 times to
r e
HARDWARE NEEDED FOR BED ASSEMBLY
ensure the gas pistons are fully lubricated.
Page 2 of 9
Qty
Ref. Description
1 10 Fabric Strap Handle
1 11 Frame Support Brackets
1 12 Mattress Stoppers
1 13 'U' Shape Cross Bar
1 14 Gas Lift Pistons
2 15 Feet
1 16 LH Wing
2 17 RH Wing
1
Qty Code Description
D
Nuts for M8 bolts
x24
E
Allen key for M8 bolts
x8
F Spanner for M8 nuts
x18
G Flat Washer for M8 Bolt
General Hints & Tips
Two person
assembly
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
Approximate time to
assemble this product
Qty
1
2
2
1
2
4
1
1
Qty
x10
x1
x1
x12