Time4Sleep FLOOR STANDING HEADBOARD FIXING Assembly Instruction Manual

Table of Contents

Download this manual

FLOOR STANDING HEADBOARD FIXING

ASSEMBLY INSTRUCTION GUIDE

Carefully unpack your headboard.

Do not use a knife to cut through packaging.

Please check that all the parts are present and read the instructions thoroughly before

commencing with assembly and retain them for future reference.

It is important to inspect all items BEFORE assembly, if for any reason you need to return this

item, you must return it in its original packaging. Assembled items CANNOT be returned.

Table of Contents

Do you have a question about the FLOOR STANDING HEADBOARD FIXING and is the answer not in the manual?

Page 1 FLOOR STANDING HEADBOARD FIXING ASSEMBLY INSTRUCTION GUIDE Carefully unpack your headboard. Do not use a knife to cut through packaging. Assembly: 2 person Required area: 1 x 2 metres Required tools: cross head screwdriver Important: Please check that all the parts are present and read the instructions thoroughly before commencing with assembly and retain them for future reference.
Page 2 Tips before you start: We recommend that all items are assembled close to the place they will be in use and on a protective surface to avoid any unnecessary movement or contact that may damage the product. For ease during assembly identify the parts required before commencing each step, taking care to avoid over-tightening the fittings as this may damage the furniture.
Page 3 Step 1 Fit headboard to bed using 4x bolts that were supplied with the bed base. These can be tightened by hand. Check your headboard is at prefered height and level before fully tightening. Please Note: This fitting is not supplied with the headboard, this is supplied with the Divan/ Ottoman base.