3
Install the:
a
Heat sink assembly
b
Hard drive and optical drive module
c
HDD assembly
d
Front bezel
e
Side cover
4
Follow the procedure in
Power switch
Removing power switch
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
HDD assembly
d
Hard drive and optical drive module
3
To remove the power switch:
a
Disconnect the power switch cable from the system board [1].
b Press the power switch retention tabs and pull the power switch out from the system [2] [3].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
49
Need help?
Do you have a question about the Optiplex 7070 Small Form Factor and is the answer not in the manual?
Questions and answers