Table of Contents
Advertisement
3
Install the:
a
Expansion cards
b
Side cover
4
Follow the procedure in
Hard drive assembly
Depending on the configuration you choose, you will have either one 3.5–inch hard drive assembly or two 2.5–inch hard drive assembly.
Removing the hard drive assembly
1
Follow the procedure in
2
Remove the
Side
cover.
3
To remove the hard drive:
a
Disconnect the hard drive data cable and power cable from the connectors on the hard drive [1, 2].
b Push the release tab and lift the hard drive assembly from the system [3].
22
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Advertisement
Table of Contents
Need help?
Do you have a question about the Optiplex 7070 Small Form Factor and is the answer not in the manual?
Questions and answers