Table of Contents
Advertisement
b Power switch
4
To remove the I/O panel:
a
Remove the screw that secures the I/O panel [1].
b Rotate the I/O panel and remove it from the system [2].
c
Disconnect the hard drive data cable [3], optical drive data cable [4] and power cable [5] from the connectors on the system
board.
5
Disconnect the following cables from the connectors on the system board:
a
Intrusion switch [1]
b CPU power [2]
c
Power switch [3]
6
Unroute the PSU cables from the retention clips [4].
62
Removing and installing components
Advertisement
Table of Contents
Need help?
Do you have a question about the Optiplex 7070 Small Form Factor and is the answer not in the manual?
Questions and answers