3
Install the:
a
Hard drive and optical drive module
b
HDD assembly
c
Front bezel
d
Side cover
4
Follow the procedure in
Processor
Removing processor
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
HDD assembly
d
Hard drive and optical drive module
e
Heat sink assembly
3
To remove the processor:
a
Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
51
Need help?
Do you have a question about the Optiplex 7070 Small Form Factor and is the answer not in the manual?
Questions and answers