Installation - HIKVISION U0T Series User Manual

Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

SMART IR mode

3-axis adjustment

1.2 Overview
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Table 0-1 Mark Description
Description
DC Voltage
Bracket
Main Body
Lens
Bracket
Main Body
Lens
Switch Button
IN DC12V
Video Cable
Switch Button
Power Cord
I N D C1 2V
Video Cable
Power
Cord