Off Mode; Menu Tools; Hot Key - NEC MD211G3 Installation & Maintenance Manual

VIDEO DETECT
Selects the video detection method, when more than one video signal source is connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from a different
video source. If a video signal is supplied by the other video source, the monitor automatically switches to the new
video source. The monitor will not look for any other video signals, as long as the current video signal is present.
LAST: When the monitor is displaying a signal from the current video source and a new secondary video source is
supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input
signal is not present, then the monitor searches for a video signal from a different video source. If a video signal is
supplied by the other video source, the monitor automatically switches to the new video source.
NONE: The monitor will not search for any other video sources, unless the monitor is turned OFF and ON again with
the Power button.

OFF MODE

The Intelligent Power Manager (IPM) in the computer's operating system allows the monitor to switch to power save
mode after a period of user inactivity.
The OFF MODE has 3 settings.
OFF: The monitor does not switch to power save mode when the input signal is lost.
STANDARD: The monitor switches to power save mode automatically when the input signal is lost.
OPTION: Monitor enters power save mode automatically when the amount of ambient light goes below the level that is
determined by the user. The level can be adjusted in OFF MODE SETTING in Tag 5 of the Advanced OSD menu.
When in power save mode, the LED on the back side of the monitor blinks amber. While in power save mode, push
any of the buttons, except for POWER and SELECT to return to normal.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
QA TEST
Provides a quick daily visual image quality check of this diagnostic monitor by just using a button on the monitor.

MENU Tools

LANGUAGE
The OSD control menus are available in nine languages.
OSD LEFT/RIGHT
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu left or right.
OSD DOWN/UP
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu Up or Down.
OSD TURN OFF
The OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touch
of a button to close the OSD control menu. The preset choices are 10-120 seconds in 5-second increments.
OSD LOCK OUT
This control completely locks out access to all OSD control functions. When attempting to activate OSD controls while
in the Lock Out mode, a screen will appear indicating the OSD controls are locked out.
There are three types of OSD LOCK OUT:
OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, then "RIGHT" button and
hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then "RIGHT" button and hold down
simultaneously while in the OSD menu. No controls can be adjusted while in the lock out mode.
OSD LOCK OUT with LUMINANCE (only) control: To activate the OSD Lock Out function, press SELECT, then
"DOWN" and "LEFT" buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then
"DOWN" and "LEFT" buttons and hold down simultaneously while in the OSD menu. LUMINANCE can be adjusted
while in this lock out mode.
CUSTOM: Refer to the Advanced OSD Menu.

HOT KEY

When this function is set to ON, the KEY GUIDE shows two P MODE control buttons. Using one of the P MODE control buttons, you
can quickly choose between two user predefi ned PICTURE MODES with the "LEFT" and "RIGHT" control buttons, without the need to
open the OSD.
English-14