NEC MD211G3 Installation & Maintenance Manual page 20

V.RESOLUTION*
EXPANSION*
H.ZOOM
(Available in Custom
Expansion mode only)
V.ZOOM
(Available in Custom
Expansion mode only)
ZOOM POS.
(Available in Custom
Expansion mode only)
Tag5 SHARPNESS
VIDEO DETECT*
OFF MODE
OFF MODE SETTING Adjusts the ILLUMINANCE value for OFF MODE. Shows the illuminance level.
RESPONSE
1
IMPROVE*
SIDE BORDER
LED BRIGHTNESS*
*1 This item will not be reset during a FACTORY PRESET.
*2 This function is not available, if a digital QXGA (1536 x 2048 or 2048 x 1536) monochrome signal is applied.
2
Adjusts the vertical size by increasing or decreasing the setting.
Press "RIGHT" button to expand the height of the image on the screen.
Press "LEFT" button to narrow the height of the image on the screen.
2 Sets the zoom method.
FULL: The image is expanded to full screen, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM: When CUSTOM is selected as the Expansion mode, it becomes possible to
adjust the H. ZOOM., V. ZOOM, and ZOOM POS.
The image is expanded from 1 to 3 times in the horizontal (H. EXPANSION) direction by
0.01 increments.
The image is expanded from 1 to 3 times in the vertical (V. EXPANSION) direction by
0.01 increments.
Sets the point from which the screen will be expanded when either H.ZOOM or V.ZOOM
is selected as the expansion method. Options are CENTER and LEFT TOP.
CENTER: H.ZOOM expands the image from the centre outward to the sides of the
screen.
V.ZOOM expands the image from the centre towards the top and bottom of the screen.
LEFT TOP: Indicates the set point for image expansion (TOP in V. Zoom, LEFT in
H.ZOOM). If the resolution does not fi ll out the screen, when expanding, the image will
not expand past the TOP or the LEFT of the screen. The image can be expanded past
the right and bottom edges of the screen.
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain as distinct or as soft image as you prefer, and is set independently
according to different timings. Press "LEFT" or "RIGHT" to adjust.
1
Selects the video detection method, when more than one video signal source is
connected. Press "LEFT" or "RIGHT" to select.
FIRST: When current video input signal is not present, then the monitor searches for a video
signal from a different video source. If a video signal is supplied by the other video source,
the monitor automatically switches to the new video source. The monitor will not look for any
other video signals, as long as the current video signal is present.
LAST: When the monitor is displaying a signal from the current video source and a new
secondary video source is supplied to the monitor, then the monitor will automatically
switch to the new video source. When current video input signal is not present, then
the monitor searches for a video signal from a different video source. If a video signal is
supplied by the other video source, the monitor automatically switches to the new video
source.
NONE: The monitor will not search for any other video sources, unless the monitor is
turned OFF and ON again with the Power button.
The Intelligent Power Manager (IPM) in the computer's operating system allows the
monitor to switch to power save mode after a period of user inactivity. The OFF MODE
has three settings.
OFF: The monitor does not switch to power save mode when the input signal is lost.
STANDARD: The monitor switches to power save mode automatically when the input
signal is lost.
OPTION: The monitor switches to power save mode automatically when the amount of
surrounding light goes below the level that is determined by the user.
Turns the Response Improve function on or off. Response Improve may reduce blurring
that occurs in some moving images. When the display is used in Portrait mode, this
function will be disabled.
Adjusts the side black bars color between black and white.
1
Controls the brightness of the power LED on the monitor.
English-18