Table of Contents
Advertisement
Quick Start
To connect the LCD monitor to your system, follow these instructions:
NOTE:
Make sure to read "Recommended Use" before installation.
In order to display the maximum resolution, a display controller that can output a resolution of 2048 x 2560 is needed.
1. Turn off the power to your computer.
2. For a PC with DVI digital output: Connect the DVI signal cable to the connector of the display controller in your system
(Figure A). Tighten all screws.
3. Remove the cable cover (Figure B).
To remove the cable cover, unlock the slide latch (1) on the cable cover (2) and slide the cover to the side to remove it.
4. Connect all cables to the appropriate connectors (Figure C).
NOTE:
Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module
and/or shorten the module's life.
Display Backside
Figure A
Figure B
Figure C
English-8
Slide latch
Cable cover
Computer
AC IN
To the wall outlet
Advertisement
Table of Contents
