Advertisement
Available languages
Available languages
9040379
5.
Use the tool at its correct speed and feed rate for optimal
performance and safety.
6.
Never operate this tool until it has been completely and properly
assembled and installed.
7.
Always use the provided blotter and wheel flanges to mount the
grinding wheels on the grinder shaft to prevent wheel damage or
accidental separation, which can result in fragments flying off the
wheel at high speeds.
8.
Use only wheels suitable for the speed of the machine.
9.
Use only wheels that have a bore exactly equal to the arbors of the
machine. Never attempt to force an undersized wheel to fit an arbor.
10. Do not overtighten the wheel nut.
11. Never use a tool with a cracked or worn grinding wheel. Change the
grinding wheel before using. Use only flanges supplied with the
grinder.
12. Never grind a workpiece on a wheel that is cold. Run the tool for one
full minute before any operation.
13. Do not grind magnesium or aluminum, as a fire may result. Always
clean the wheel between operations involving different materials.
14. Dress the wheel on the face only.
15. Contact a workpiece with the face of the wheel only.
16. Never apply coolant directly to the grinding wheel. Coolant can
weaken the bonding strength of the grinding wheel and cause it to
fail. Dip the workpiece in water to cool it.
17. When operation is complete, always disconnect the tool form its
power source and lock the switch in the off position.
1.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must repair
and verify the power tool is operating correctly, before it can be used.
2.
Ensure the power supply matches the tool's motor voltage (see
Specifications).
6
8 in. Variable-Speed Bench Grinder
For technical questions call 1-800-665-8685
V1.0
Advertisement
