Volcanic Cinder Placement; On/Off Switch - Hargrove HARETHC24N2C Installation And Operation Manual

The Volcanic Cinder is the large bag of black rock that is included in the log set. The
purpose of it is to cover the fireplace floor surrounding the set. The Volcanic Cinder
will also cover the metal Lighting Instruction tags and help keep them out of sight.
1. Once the burner system is in place, pour the Volcanic Cinder on the floor of the fireplace. DO
NOT POUR ANY VOLCANIC CINDER ON THE BURNERS OR AROUND THE PILOT.
2. You may use the Volcanic Cinder to cover up the Lighting Tags that are attached to the set.
DO NOT REMOVE THE LIGHTING TAGS FROM THE BURNER SYSTEM. THIS WILL VOID
THE MANUFACTURER'S WARRANTY.
DO NOT POUR VOLCANIC CINDER ON THE BURNER OR AROUND THE PILOT.
WARNING:
GLASS DOORS MUST BE OPEN WHEN APPLIANCE IS IN OPERATION.
MILLIVOLT CONCEALMENT

VOLCANIC CINDER PLACEMENT

VOLCANIC CINDER
(MILLIVOLT VALVE ONLY)
1215CL Half Pinceone to
conceal the gas valve.

ON/OFF SWITCH

You may use
the Volcanic
Cinder to cover
up the metal
Lighting
Instruction tags.
13