3) Thread one clevis and M3 lock nut on
to each elevator control rod. Thread the horns
on until they are flush with the ends of the con-
trol rods.
4) Elevator and rudder pushrods assembly
as pictures below.
690mm.
M2 clevis.
Crimp.
Cable end.
Elevator pushrod.
M2 lock nut.
Metal connector.
M3 Clevis.
Elevator pushrod.
Rudder pushrod.
Rudder pushrod.
THE TAIL WHEEL - STRUT SUPPORT.
1) Locate the items for this section of the
manual.
21