Table of Contents
Advertisement
Charging Instructions
- Use the micro usb cable, plug it into the charging port of the controller, and connect to
a 5V USB charger for charging.
- The motor battery can be charged using a 5V USB charger with a 1-to-4 charging device.
Indicator light
Do not stack controller batteries together without any barriers when not in use, as
REMOTE AIR RIG Installation note
1、 Installation
First install the Bluetooth controller into the slot of the REMOTE AIR RIG
large handwheel extension device (*must be inserted to the end). Then turn the
controller clockwise until the controller can't rotate, the installation is complete.
Loosen to adjust
the position of the
handwheel
Handwheel
connecting rod
(Removable)
Lens data mark
(Labels can be affixed)
·Status Indicator
·Purple means charging
·White means charging
is complete
this can easily damage the batteries.
The color of the
indicator light
WHITE
GREEN
YELLOW
RED
Controller
installation slot
(1/4 screw hole)
10
·Status Indicator
·Red means charging
·Green means charging
is complete
Residual
electricity
100% - 75%
75% - 50%
50% - 25%
25% - 0%
1/4 screw
Advertisement
Table of Contents
