Auto/Manual mode switch
Switch Control Mode
*With the controller and motor connected, rotate the controller to the
nearest focus position and pause for 5 seconds. The motor will then
enter automatic focus mode;
*Rotate the controller back a certain angle (more than 10 degrees),
pause for Over one second, and then return to manual focus control
mode.
1.While in the connected state, the
controller rotates to the closest
focus position, and the motor will
enter the automatic focus mode.
Table 3 Bluetooth Controller Instruction of Button
Number of press on the buttons
①
Long press for 3 seconds
②
Short press a times
③
Short press a times and then long press for 3 seconds
④
Short press 3 times and then long press for 3 seconds
⑤
Short press 7 times
⑥
Short press 4 times and then long press for 3 seconds
②
Press once to set point A, press the second to set point B, press the third time to start the
automatic operation of point AB, press the fourth time to cancel the automatic operation Run,
cancel point AB. (*The speed of automatic operation increases or decreases linearly
according to the rotation angle of the knob)
2.The controller rotates slightly to the
other side beyond a range of 10
degrees for over 1 second and then
returns to manual focus control mode.
A-B FOCUS LIMITS
AUTO CALIBRATION
BLUETOOTH PAIRING
MOTOR DIRECTION
MODE FOCUS
9
ON/OFF
ZOOM