Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PDMOVIE Live Air 2
Summary of Contents for PDMOVIE Live Air 2
- Page 1 Live Air 2 PDMOVIE Wireless Follow Focus System...
-
Page 2: Notice For Use
Wecome To Use LIVE AIR 2 Notice For Use Before using the product, please read the instructions carefully or watch the tutorial videos to learn how to use the products properly. If there are any direct or indirect adverse effects due to operational errors, PDMOVIE will not assume any responsibility. -
Page 3: Configuration List
Configuration List ② ① ③ ④ Controller Controller MOTOR MINI Controller （PDL-TC-AFP） （PD2-HT） （PDL-TC-AZ） （PD-BTMP ） ⑤ ⑥ ⑦ ⑧ Li42B Battery Li42Bx2 Battery Micro USB Li42B Battery Charger Charging Cable ⑨ ⑩ 15MM Pipe USB Charging Cable 0.9m Camera Hot Shoe Clamp ( 4 pin ) PDL-AFP PDL-AZP... -
Page 4: Install Motor
PDL-AFP/AZP Instruction Manual Antenna Micro USB 0.8 Gear Charge Interface CALIBRATION/ RESET Button ON/OFF Button Lights For Controller Status Lights For U-clamp Motor Status Focus Control Wheel Battery 1. Install Motor Install the motor on the 15mm rod and make sure the motor gear matches with the lens gear.( If it install on DSLR Camera lens, please use the camera hot shoe clamp.) Step 1. -
Page 5: Bluetooth Connection
2. Turn on the Bluetooth controller and motor Press the ON/OFF button on the Bluetooth controller for three seconds until the indicator light powers on. The motor will turn on automatically when the battery is inserted. 3. Bluetooth Connection After the Bluetooth controller is turned on, the indicator lights will flash quickly for 60 seconds, which means the Bluetooth is searching. -
Page 6: Charging Instructions
(3) Manually calibration: A. When the motor gear and the lens gear are completely connected,turn the lens to the starting point and hold for 0.5 seconds. B. Then turn the lens ring to the end and hold for 0.5 seconds. C. - Page 7 Table 2 Bluetooth controller. Instruction of button Number of clicks on the buttons Function ① ON/OFF ② A-B Focus Limits ③ Auto Calibration ④ Bluetooth Pairing ⑤ Motor Direction Table 3 Motor Instruction Table Number of click Function on the buttons ①...
- Page 8 REMOTE AIR APP The motor can also be controled by the iOS app. Please search PDMOVIE or REMOTE AIR, then download the app from the Apple store. 3. Turn on the APP 2.Initiate Bluetooth (Automatically 1.Turn on the motor.* on phone.
-
Page 9: Bluetooth Control
PDL-AP Instruction Manual Bluetooth Control Start pairing 1. Controller turns on Bluetooth 3. Successful connection： 2. Insert the battery to start the mode： The Bluetooth logo on the motor. Please make sure the handle is controller screen is always turned off, and then press the on and the status indicator of ON/OFF button and the FOCUS the control handle is green,... - Page 10 RESET calibration. 2. Live Air 2（PDL-AZP) can adjust the response speed of the motor, click the ON/OFF button on the controler five times to change the motor speed. The motor has slow, medium, and fast settings.