Note:
• Do not disconnect the AC
cord when the software
upgrade is in progress, as
this may cause the
upgrade to fail. At this time
you cannot use any of the
buttons.
• When the TV searches for
a software upgrade signal,
the message "Please
wait..." will appear.
Software upgrade (DTV mode only)
Software Upgrade
Software Upgrade allows you to download the latest software available for the channel.
Press MENU SETUP
1
/
to select the Setup menu, and then press ENTER/CH LIST
2
Press
/
3
to select Software Upgrade, and
Press
then press ENTER/CH LIST
check if the TV has the Over Air Download service.
A progress bar appears to indicate scanning
progress.
4
If software upgrade is available from the Over Air
Download (OAD), a message prompt with option to
upgrade software from OAD appears.
/
to select Yes, and then press
5
Press
ENTER/CH LIST
initiated.
If you select No, the update will be cancelled. You
can return to watching your TV programmes.
6
Once the process is completed, press
ENTER/CH LIST
or DIGITAL MENU
to display the Main Menu screen.
to select Start to
. The software upgrade is
to reboot the TV.
.
Password Setup
>>
Version
>>
Software Upgrade
>>
>>
Common Interface
Vertical Position
0
Software Upgrade
Cancel
Please Wait
Progress
Software Upgrade
There is new Software! Do you want to
download the new Software?
No
Yes
Software Upgrade
Upgrading... don't Power Off!
Progress
0%
Software Upgrade
Success, TV will reset!
Yes
43