Page 2
Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing of new products containing the restricted substances. Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities.
“This product is marked with “CE” and complies therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.” LCD TV/DVD COMBINATION Responsible for CE-marking is TOSHIBA INFORMATION SYSTEMS (U.K.) LTD, Toshiba Court, Weybridge Business Park, Addlestone Road, Weybridge, Surrey, KT15 2UL, United Kingdom...
Page 6
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: as vases, shall be placed on the apparatus.
Page 7
53~57. If you have problems with reception, consult a specialist of aerial. therefore remove exhausted batteries immediately. Open the battery Install the batteries as shown Close the battery Illustration of 19DV615DG/19DV616DG/22DV615DG/22DV616DG Illustration of 26DV615DG compartment. below, ensuring the correct compartment.
Page 8
Automatic station presetting with the built-in Tuner/ Manual TV station presetting Changing the order of stored channels Automatic station presetting with the built-in Tuner If you like, you may manually tune a certain station into a selected program position, without Perform this feature to search for and store new analogue TV deleting or modifying program position’s contents.
Page 9
Stereo reception with the built-in analogue tuner Picture format The built-in Tuner can detect and NICAM stereo sound reception: The broadcaster may transmit a Wide Screen Signalling (WSS) signal which can determine the correct receive NICAM stereo broadcasts picture width and set it automatically when the AUTO setting is used. If you want to change this setting, you automatically.
Page 10
Language Setup/Auto Scan Manual Scan/ Carrier Setup Language Setup Manual Scan Preparation: With the Manual Scan option, you can tune one carrier at a time, Switch on appliance. Press TV/DVD to select the TV mode, then by entering the carrier parameters manually. press ATV/DTV.
Page 11
Display Setup/Time Setup Password Setup (Parental lock) Display Setup Password Setup (Parental lock) This feature allows you to have a parental control of the service Press to select ‘Display Setup’, then press ENTER. viewing as per your preference. Once a service is protected with a password, it cannot be Main menu System Configuration viewed unless the correct password is provided.
Page 12
Multi audio/DVB-Subtitle/Using the Digital Service (UK only) EPG (Electronic Program Guide) Multi audio The Guide menu shows the Press GUIDE to display the Guide menu. You can select your preferred Audio mode and DVB (digital TV) available programme listings for the subtitle Language.
Page 13
Playing a disc Playing a disc This section shows you the basics on how to play a disc. To pause playback (still mode) Press during playback. To resume normal playback, press PLAY ( Basic playback (DVD/VCD/Audio CD) Preparation • The sound is muted during still mode. Press on the unit.
Page 14
Marking desired scenes Repeat playback/A-B Repeat playback Marking the scenes (DVD/VCD/Audio CD) Repeat playback (DVD/VCD) The unit stores the points that you want to watch again up to 3 Press PLAY MODE during playback or stop mode. points. You can resume playback from each scene. Press MARKER during Press ENTER repeatedly to Play Mode...
Page 15
MP3/JPEG/DivX ® and Audio CD operation MP3/JPEG/DivX ® and Audio CD operation This unit can playback the MP3/JPEG/DivX ® -data which has been recorded on CD-R/RW. Audio CD also Loading CD can be played back. To produce the MP3/JPEG/DivX ® -data, you need a Windows-PC with CD-RW drive ®...
Page 16
MP3/JPEG/DivX ® and Audio CD operation MP3/JPEG/DivX ® and Audio CD operation Repeat playback (Audio CD/MP3/JPEG/DivX ® Program playback (Audio CD/MP3/JPEG/DivX ® In the file browser, press / / / In the file browser, press / / / to select “Repeat” during stop to select “Edit Mode”, then press Folder-1 Select Files...
Page 17
Customizing The Function Settings Customizing The Function Settings Menu, Subtitle, Audio Picture Mode You can select the language of “Menu”, “Subtitle” and “Audio” if more than There are two types of source content in pictures recorded in DVD video one language is recorded onto the disc. discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).
Page 18
Language Code List PC connection Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see pages 48). As PCs are sometimes supplied with a ‘conventional’ CRT monitor, you may need to adjust the display settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still Language Name Code Language Name Code Language Name Code Language Name Code...
Page 19
3/14/09 3:12:53 PM Specifications Troubleshooting table Please check the following list before requesting service. Model 19DV615DG/ 22DV615DG/ 26DV615DG 19DV616DG 22DV616DG Symptom Possible solution Page No picture, no sound Switch on the set. System: Analogue: PAL UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L Check that the mains power outlet is properly connected.
When you exchange IC and Transistor with a heat sink, apply silicon grease (YG6260M) on the contact section of the heat sink. Before applying new silicon grease, remove all the old silicon grease. (Old grease may cause damage to the IC and Transistor). A1-1 19DV616DG/22DV616DG...
• Soldering time: Within 3 seconds • Soldering combination: Sn-3.0Ag-0.5Cu • When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to keep the Flux smoke away from it. Circuit bridge points Pick Up PCB Fig. 1 A1-2 19DV616DG/22DV616DG...
3. Press both VOL. DOWN button on the set and Channel button (3) on the remote control for more than 2 seconds. 4. The 4 digit password has naw been cancelled. NOTE: No indications on the screen when the Parental Lock is setting. Initializing password is 0000. A1-3 19DV616DG/22DV616DG...
2. Set the DVD to the Stop Mode. 3. Press it in order of "SETUP", "SUBTITLE", "3", "AUDIO SELECT" and "0" key of a remote control unit. 4. The On Screen Display message " " will appear. 5. The Tray Lock has now been cleared. A1-4 19DV616DG/22DV616DG...
EPG Timer 0.8 W at 230V 50Hz Per Year kWh/Year Protector Power Fuse Regulation Safety CE(EN60065:2002+AMD.1:2006) Radiation X-Radiation Temperature Operation C ~ +40 Storage C ~ +60 Space Around Unit 100 mm(4inch) Operating Humidity Less than 80% RH A2-1 19DV616DG...
Page 26
TEXT / TV HOLD / Skip- Reveal / Search- Sub Page / Search+ F.T.B / Skip+ Red / Slow- Green / Pause Yellow / Play Mode Cyan / Slow+ CH Up / Page Up CH Down / Page Down A2-2 19DV616DG...
Page 27
Picture Scroll (Vertical Position) PFC(Power Factor circuit) Freeze frame HD-Ready Plug and Play Brand Badge LED Scart Spec Scart1 AV in AV out Yes (A.Tuner/D.Tuner/Monitor) S-Video in RGB in Scart2 AV in AV out S-Video in RGB in A2-3 19DV616DG...
Page 28
(DVD) JPEG Video CD Playback SVCD Playback MP3 Playback Divx Playback DMF Support Digital Out (Dolby Digital) (MPEG) (PCM) (DTS) Down Mix Out (Dolby Digital) (DTS) 3D Surround Closed Caption Screen Saver Audio DAC 192kHz / 24bit Macrovision A2-4 19DV616DG...
Page 29
AC Inlet Euro Scart (21Pin) 1Scart (AV1) PC Monitor Input (D-Sub) Audio Input Mini Pin Jack( 3.5), STEREO HDMI Input 1 Audio Input (HDMI/DVI In use) PC Monitor Audio Input Alternative HDMI Input 2 Audio Input (HDMI/DVI In use) A2-5 19DV616DG...
Page 30
Container Stuffing 1140 Sets/40' container w/Pallet w/Wrapping G-18 Material Cabinet Cabinet Front PS 94V0 NON-DECABROM Cabinet Rear PS 94V0 NON-DECABROM Non-Halogen Eyelet G-19 Environment Environmental standard requirement Green procurement of TOSHIBA Pb- Free Phase3(PHASE3A) Measures for Whisker WEEE A2-6 19DV616DG...
Page 31
GENERAL SPECIFICATIONS LCD Size / Visual Size 21.60 inch / 547.7mmV System LCD Type Color TFT LCD Number of Pixels 1366(H) x 768(V) View Range Left/Right 85/85 degree Up/Down 80/80 degree < Bright Dot Zero Bright Dot Ratio Color System PAL / SECAM Speaker 2 Speaker...
Page 32
EPG Timer Events 8Programs / 8Days G-11 Remote Unit RC-QJ Control Glow in Dark Remocon Remocon Format TOSHIBA Format TOSHIBA Custom Code 40-BF h ,44-BB h ,45-BA h ,45-BC h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs...
Page 33
GENERAL SPECIFICATIONS G-12 Features Power On Memory Auto Shut Off Just Clock Function Game Position Comb Filter Auto Set Up (Fast installation) Auto tuning (Analog tuner) CH sort Auto clock (Analog tuner) Plug in start Picture Setting(TV) Picture Preference Brightness , Contrast , Color Tint Sharpness Color Temperature...
Page 34
GENERAL SPECIFICATIONS Digital Text (VBI teletext) MHEG-5 EPG (BBC type 8Days Digital tuner only) OAD (Over Air Download) Common Interface (Digital tuner only) Rec Screen Status Ch sorting based on Ch List (Digital/Germany only) Rename Carrier (Digital) Edit Event Timer Software Update via CI Slot Preference Language (Audio/Subtitle/Digital Service)(Digital) Ch Organizer (Lock, Skip, Go To, Delete, Rename, Move, Move to, Change No.)
Page 35
GENERAL SPECIFICATIONS G-13 Accessories Owner's Manual (Full) Language English, French, German (Simplified) Italian, Spanish, Dutch, Danish, Norwegian, Swedish, Finnish, Czech, Greek w/Guarantee Card Remote Control Unit Rod Antenna Poles Terminal Loop Antenna (W/ Antenna Change Plug) Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Registration Card...
Page 36
Height (cm) Container Stuffing Sets/40' container w/Pallet w/Wrapping G-18 Material Cabinet Cabinet Front PS 94V0 NON-DECABROM Cabinet Rear PS 94V0 NON-DECABROM Non-Halogen Eyelet G-19 Environment Environmental standard requirement Green procurement of TOSHIBA Pb- Free Phase3(PHASE3A) Measures for Whisker WEEE A2-12 22DV616DG...
4. Unlock the support (2). 5. Remove the Cover AC in the direction of arrow (B). 6. Remove the 10 screws (3). Cover Inverter Cover AC LCD Panel CP7002 CP7001 Fig. 1-2 Back Cabinet Ass'y Fig. 1-3 B1-1 B1-1 19DV616DG 19DV616DG...
Page 38
5. When installing the DVD Deck, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD MT PCB connector. CP5801 CP2201 Back Cabinet Ass'y Fig. 1-6 B1-2 B1-2 19DV616DG 19DV616DG...
Page 39
2. Remove the Panel Side Ass'y in the direction of arrow (A). 3. Remove the 2 screws (2). 4. Remove the Operation PCB in the direction of arrow (B). Back Cabinet Ass'y Operation PCB Panel Side Ass'y Fig. 1-8 B1-3 B1-3 19DV616DG 19DV616DG...
Page 40
DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: FRONT CABINET ASS'Y and LCD PANEL AND P.C. BOARDS (Refer to Fig. 1-3) 1. Turn up set and put the Front Cabinet Ass'y of LCD CAUTION on the top. 2. Remove the Front Cabinet Ass'y in the direction of Be careful not to remove the FFC cable forcibly, because the FFC cable may be damaged.
Page 41
DISASSEMBLY INSTRUCTIONS 1-4: DVD MT PCB and DVD DECK (Refer to Fig. 1-4) 1-5: POWER PCB and REMOCON PCB (Refer to Fig. 1-5) 1. Put the Back Cabinet Ass'y on the bottom. 1. Remove the 2 screws (1). 2. Short circuit the position shown in Fig. 1-4 using a 2.
Page 42
DISASSEMBLY INSTRUCTIONS 1-7: DIGITAL PCB (Refer to Fig. 1-7) 1. Remove the 2 screws (1). 2. Remove the Digital PCB in the direction of arrow (A). 3. Remove the 2 screws (2). 4. Remove the Shield CI Card Bottom Ass'y in the direction of arrow (B).
Page 45
Loader Sub Ass'y on the Loader Sub Ass'y as shown Fig. 2-3-G. Gear Worm 14.3 + 0, - 0.1mm Loading Motor Check Hook Check Hook Fig. 2-3-G Safety surface for pressing of the insert. Fig. 2-3-B 19DV616DG/22DV616DG 19DV616DG/22DV616DG B2-3 B2-3...
Page 46
1. In case of the Retainer Shutter Ass'y installation, check if the value of the Fig. 2-4-B is correct. Fold 2. In case of the Clamper Ass'y installation, Fig. 2-5-A check if the value of the Fig. 2-4-C is correct. 19DV616DG/22DV616DG 19DV616DG/22DV616DG B2-4 B2-4...
Page 47
71 ± 1mm Fold it by 90° Fig. 2-5-C [ 5 pin FFC ] Printing Surface 25 ± 1mm Fold it by 90° Fold it by 90° 15 ± 1mm 10 ± 1mm 16 ± 1mm Fig. 2-5-D 19DV616DG/22DV616DG 19DV616DG/22DV616DG B2-5 B2-5...
Shield Wire. (Refer to Fig. 3-4.) Blower type IC NOTE desoldering machine Do not move the Braided Shield Wire in the vertical direction towards the IC pattern. Braided Shield Wire Soldering Iron Fig. 3-2 IC pattern Fig. 3-4 B3-1 B3-1 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 49
Fig. 3-6 3. Absorb the solder left on the lead using the Braided Shield Wire. (Refer to Fig. 3-7.) NOTE Do not absorb the solder to excess. Soldering Iron Braided Shield Wire Fig. 3-7 B3-2 B3-2 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
2 sec. (No disc) Refer to the "PARENTAL CONTROL - RATING LEVEL". Method Operations Press the following remocon keys continuously. The disk cannot be taken out. SETUP --->SUBTITLE ---> 3 ---> Refer to the "TRAY LOCK". AUDIO SELECT ---> 0 19DV616DG/22DV616DG...
Released times on the same date Laser drive time Release date (Example: 2009.2.16) DVD LD: 0Hour CD LD : 0Hour X=October Y=November Z=December When the changed version displays, the Re-write will be completed. 14. Turn off the power 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
12. Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds. 13. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. 19DV616DG 19DV616DG...
Page 53
WHEN REPLACING EEPROM (MEMORY) IC CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS AND MICON VERSION Initial total of MEMORY IC, POWER ON total hours and MICON VERSION can be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0".
Page 54
7. To display the adjustment screen fo DTV mode, select the ATV/DTV button on the remote control. 8. Press the VOL.DOWN button on the set and the channel (9) on the remote control for more than 2 seconds. 19DV616DG 19DV616DG...
Page 55
Activate the adjustment mode display of Fig. 1-1 and press the channel button (35) on the remote control to select "CONTRAST MAX". Press the LEFT/RIGHT button on the remote control until the contrast step No. becomes "51". Check if the picture is normal. 19DV616DG 19DV616DG...
Page 56
ELECTRICAL ADJUSTMENTS 1. ADJUSTMENT PROCEDURE NO. FUNCTION NO. FUNCTION Read and perform these adjustments when repairing the 01 OSD H POSI 24 V POSI circuits or replacing electrical parts or PCB assemblies 02 OSD V POSI 25 V POSI MAX 03 R DRIVE(N) 26 V POSI MIN CAUTION...
Page 57
ELECTRICAL ADJUSTMENTS 2-2: CONTRAST MAX 1. Place the set in Aging Test for more than 30 minutes. 2. Receive the color bar pattern. (RF Input) 3. Using the remote control, set the brightness and contrast to normal position. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (35) on the remote control to select "CONTRAST MAX".
41 TEXT H POSI 42 TEXT V POSI NOTE: For the step no. with + mark, please adjust it according to the 2-4. For the step no. with * mark, please adjust it according to the situation of the set. 19DV616DG...
Page 59
ELECTRICAL ADJUSTMENTS 2-3: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each of the adjustment item is set correctly referring below. (TUNER/AV/COMPONENT/HDMI/PC/DVD/DTV) COMPONENT (NTSC) COMPONENT (PAL) HDMI (NTSC) HDMI (PAL) TUNER FUNCTION CVBS S(Y/C) 480i 480p 720p 1080i...
Page 60
34 CONTRAST CENTER 35 CONTRAST MAX 36 CONTRAST MIN 37 CONTRAST 40 38 COLOR CENTER 39 COLOR MAX 40 COLOR MIN NOTE: For the step no. with * mark, please adjust it according to the situation of the set. 19DV616DG D-10...
Page 61
ELECTRICAL ADJUSTMENTS 2-4: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each of the adjustment item is set correctly referring below. (TUNER/AV) AV1(SCART1) AV2(RCA) AV1(SCART1) AV2(RCA) TUNER CVBS CVBS S(Y/C) FUNCTION 576i 576i 480i 576i 480i 576i 480i...
Page 63
ELECTRICAL ADJUSTMENTS 3. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) LCD PANEL CD2302 DVD DECK DVD MT PCB CP2302 CP2305 CD2303 CD2301 CP2301 DIGITAL PCB POWER PCB TUNER PCB CP3001 CP6401 CP7001 TU5801 CP7002 CP5803 CD6501 CD7201 CP7003 CP7004 CP6501 CP7202 CP8101 CP5802...
Page 64
TROUBLESHOOTING GUIDE (LCD SECTION) POWER DOES NOT TURN ON Is F501 broken? Change F501. Is there voltage at pin Check IC501 and peripheral 6 of IC501 21V? circuit. Change MAIN PCB. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 65
Change SP301 and SP302. 1 and 4 of CD301? Is there signal at pins 2 Check IC301 and peripheral and 4 of IC301? circuit. Check IC803 and peripheral Is there signal at pin circuit. 14 of TU5801? Change TU5801. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 66
Check Q3810 and peripheral Is there voltage at pins 1, circuit. 2 and 3 of CP7201 5V? Is there signal at pins 7, 9, 10, 12, 13, 22, 23, 25, Change V7201(PANEL). 26 and 28 of CP7201? Change MAIN PCB. 19DV616DG...
Page 67
TROUBLESHOOTING GUIDE THE PICTURE DOES NOT APPEAR Is CP7001, CP7002, Connect CP7001, CP7002 Does backlight shine? CP7003 and CP7004 CP7003 and CP7004. Is the voltage at pins Check D515, T501 and 11, 14 of IC7001 24V? peripheral circuit. Connect CD7201 Is CD7201 connected? Is there voltage at pins Check Q3810 and peripheral...
Page 68
TROUBLESHOOTING GUIDE THE COLOR DOES NOT APPEAR Is setting of color Adjust the color. normal? Is the color signal Receive the color signal. received? Change MAIN PCB. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 69
Check the disc. logo picture? Does this have signal Check pins 8 and 10 of at pins 149 and 151 of CP8501 and peripheral circuit. IC4001? Does IC4001 gets P.CON+3.3V and Change IC4001. P.CON+1.8V? Check P.CON+3.3V and P.CON+1.8V line. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 70
Does this eject disc at Does this have signal at Check IC4001 and change DVD DECK? pins 1 and 3 of CP2302? peripheral circuit. Change DVD DECK. Does this have signal at Change IC2301. pins 4 and 5 of CP2302? Change IC4001. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 71
Is the voltage between Does CD2301 connect Does this display JG017 and JG018 less with CP2301 correctly? "INCORRECT DISC"? than 0.3V? Connect CD2301. Does this display Change IC4001. reading mark? Change DVD DECK. Does disc rotate? Change IC4001. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 72
Is the voltage between Does CD2301 connect Does this display JG019 and JG018 less with CP2301 correctly? "INCORRECT DISC"? than 0.3V? Connect CD2301. Does this display Change IC4001. reading mark? Does disc rotate? Change DVD DECK. Change IC4001. 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 73
Change MAIN PCB. NO SOUND DVD/CD DIGITAL AUDIO Does this have signal Change MAIN PCB. at pin 1 of CP8501? Does this have signal Check line circuit IC4001 at pin 122 of IC4001? to CP8501. Change IC4001. E-10 E-10 19DV616DG/22DV616DG 19DV616DG/22DV616DG...
Page 74
103E 203 101I 101H 101L 101E 101L 103E 101L 103D 101G 101A 101K PCB290 103D (TUNER PCB ASS'Y) 101H 103D 103C 101F 103B 103A 101B 101C Note: Hinge Ass'y (129) is not included in Stand Ass'y (103). 19DV616DG J1-2 J1-1...
Page 78
If the repair is needed, replace the SW002 SW001 DVD MECHA ASS'Y. M2603 NOTE: Applying positions AA, AB and AC for the grease are displayed for this section. CLASS MARK Check if the correct grease is applied for each position. GREASE J2-1 19DV616DG/22DV616DG...
Page 99
POWER BLOCK DIAGRAM D517 POWER FAIL SW Q505 POWER FAIL D507 KTA1504S_Y_RTK L501 CD501 D508 TRANS FORMER D510 AT+12V AT+12V AC IN AC IN D518 D518 T501 D514 J501 SOUND +B F501 SOUND GND C502 D523 POWER CTL AT+5.8V IC501 FA5571N-D1-TE1 D515 INV+B SWITCHING...
Page 117
PRINTED CIRCUIT BOARDS LOADING MOTOR SOLDER SIDE SW002 SW001 CD2302 FEH002A SOLDER SIDE M2602 M2601 19DV616DG/22DV616DG G-25...
Page 118
SD_BA0 RAMDQM 1K 1/16W RAMWE# RAMCLK RAMCKE PCB130 DMH104 NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. 19DV616DG...
Page 120
B4008 EBMS160808A102_RDC45 FROM AUDIO/VIDEO RESET P.CON+3.3V_D D_GND PCB130 DMH104 NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. 19DV616DG...
Page 122
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES DURING PLAYBACK. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES 19DV616DG H-10...
Page 124
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER CRITICAL FOR SAFETY,USE ONES DANGEREUSES AN POINT DE VUE SECURITE DURING PLAYBACK. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES H-13 19DV616DG H-14...
Page 126
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-17 19DV616DG H-18...
Page 128
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DANS LA NOMENCLATURE DES PIECES H-21 19DV616DG H-22...
Page 130
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE DESCRIBED IN PARTS LIST ONLY WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES H-25 19DV616DG H-26...
Page 132
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES H-29 19DV616DG H-30...
Page 133
AV SWITCH SCHEMATIC DIAGRAM (MAIN PCB) FROM/TO JACK OUT (1608) CP4300 (CP8101) TWG-P23P-A1 C1003 W890 AUDIO_LOUT LOUT FROM SOUND AMP MUTE C1005 W893 AUDIO_ROUT ROUT AUDIO_ROUT AUDIO_LOUT S_JACK_C AV1_C S_JACK_Y AV1_Y YUV_A_L YUV L IN YUV_A_R YUV R IN TO DVD_INTERFACE/AV_SWITCH CVBS_IN CVBS1 AV2_AUDIO_L...
Page 134
CAUTION: DIGITAL TRANSISTOR NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-33 19DV616DG H-34...
Page 136
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES H-37 19DV616DG H-38...
Page 137
TUNER SCHEMATIC DIAGRAM (MAIN PCB) W897 FROM/TO REGULATOR 1080I_LOW_SW P.CON+12V DTV+3.8V P.CON+5VTU DTV+5V TO SCALER D_TU_AUDIO_R D_TU_AUDIO_L FROM/TO SUB MICON F_SCL (TUNER PCB) F_SDA FROM REGULATOR2 P.CON+3.3V TO AV SWITCH D_TUNER_V D_TUNER_U D_TUNER_Y TO DVD_INTERFACE/AV_SWITCH D_TUNER_SPDIF FROM/TO POWER IN/OUT R5814 CP5801 (CP6401) TKC-W30P-U1 BLK ST...
Page 138
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME AV_SW WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE EPG_LED WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. STANDBY_LED H-41 19DV616DG H-42...
Page 140
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-45 19DV616DG H-46...
Page 142
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME CAUTION: DIGITAL TRANSISTOR NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-49 19DV616DG H-50...
Page 143
JACK SCHEMATIC DIAGRAM (MAIN PCB) FROM/TO SCALER REMOCON KEY-A VGA-R VGA-G VGA-B VSYNC HSYNC DVI-PC_AUDIO_R DVI-PC_AUDIO_L KEY-B EPG_LED FROM INTERFACE_HDMI IC DDVS HDMI/PC AUDIO IN DDHS J4208 PJ-364H KEY-B DVI-PC_AUDIO_R R4317 FROM/TO OPERATION DVI-PC_AUDIO_L B4326 (CP2201) CD4301 BLM18PG181SN1D CU231502 B4322 FCM1608CF-600T06 KEY B R4318...
Page 144
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-53 19DV616DG H-54...
Page 146
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-57 19DV616DG H-58...
Page 147
DVD_INTERFACE/AV_SWITCH SCHEMATIC DIAGRAM (MAIN PCB) FROM TUNER D_TUNER_SPDIF FROM REGULATOR2 P.CON+3.3V FROM REGULATOR DVD_SPDIF P.CON+9V MOTOR_GND P.CON+12V P.CON+5V_DVD MOTOR+6V P.CON+3.3V_DVD C6513 0.1 B FROM/TO AUDIO/VIDEO FROM/TO SCALER CP6501 (CP8501,CP8502) A2006WV0-2X11P DVD_SPDIF SPDIF-134 DVD_SLOT_IN ZERO_MUTE ZERO DVD/CVBS_AUDIO_R SPDIF DVD/CVBS_AUDIO_L B6503 P.CON+3.3V DVD_RESET DVD_RESET AV_SW...
Page 148
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES H-61 19DV616DG H-62...
Page 150
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-65 19DV616DG H-66...
Page 152
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NFMIOEM OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-69 19DV616DG H-70...
Page 154
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-73 19DV616DG H-74...
Page 156
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DANGEREUSES AN POINT DE VUE SECURITE DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES H-77 19DV616DG H-78...
Page 158
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-81 19DV616DG H-82...
Page 160
2.5A 250V (F501) THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST IS NON POLAR ONE. WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-85 19DV616DG H-86...
Page 162
DANGEREUSES AN POINT DE VUE SECURITE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES H-89 19DV616DG H-90...
Page 164
DANGEREUSES AN POINT DE VUE SECURITE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DANS LA NOMENCLATURE DES PIECES H-93 19DV616DG H-94...
Page 165
SOUND AMP SCHEMATIC DIAGRAM (POWER PCB) SOUND AMP IC IC301 LA42052-E Ripple OUT2 OUT1 Filter HEADPHONE JACK R308 10.3 14.0 J301 PJ-364H 680 1/4W W846 R304 R306 W823 2.2K 2.2K R309 B308 R305 R307 HCB3216KF-391T20 FROM JACK OUT 680 1/4W R310 B307 2.2K...
Page 166
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. H-97 19DV616DG H-98...
Page 167
JACK OUT SCHEMATIC DIAGRAM (POWER PCB) JACK_GND W860 FROM/TO AV SWITCH COMPONENT_VIDEO_IN CP8101 (CP4300) J8102 RCA-341H(NI)-09 127301123K2 LOUT_SOUND B8101 LOUT AV3_Y FCM1608KF-151T06 ROUT_SOUND B8102 ROUT AV3_PB FCM1608KF-151T06 AV1_C B8103 AV1_C AV3_PR (OPERATION PCB) FCM1608KF-151T06 AV1_Y AV1_Y FROM/TO JACK AL2/YUV_A_IN_L CP2201 (CD4301) YUV L IN R2201_1...
Page 168
SW 1 (CLOSE) SP1+ PCB630 PCB610 DED020 FEH002 NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. H-101 19DV616DG/22DV616DG H-102...
Page 169
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST CRITICAL FOR SAFETY,USE ONES DANGEREUSES AN POINT DE VUE SECURITE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES H-103 19DV616DG H-104...
Page 171
200mV SOUND AMP MUTE 2.0ms 200ms 500mV INTERFACE_HDMI IC 2.0ms 10Ps 500mV AV SWITCH SOUND AMP 10Ps 2.0ms 10Ps 200mV NOTE : The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. 19DV616DG/22DV616DG...
Page 172
500mV 200mV 2.0ms 100Ps 10Ps 100mV 500mV 100mV 200ns 10Ps 50mV MEMORY 10Ps 100Ps 50mV 500mV AUDIO/VIDEO 10Ps 200Ps 50mV NOTE : The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. 19DV616DG/22DV616DG...
Need help?
Do you have a question about the 19DV616DG and is the answer not in the manual?
Questions and answers