Table of Contents
Advertisement
Important safety information
Where to install
Locate the television away from direct sunlight and strong lights; soft and
indirect lighting is recommended for comfortable viewing. Use curtains
or blinds to prevent direct sunlight from falling on the screen.
Always place the TV on a sturdy, level, stable surface that can support
the weight of the TV. In order to maintain stability and prevent the TV
from falling over, secure the TV with a sturdy strap from the hook on the
rear of the TV to a wall stud, pillar, or other immovable structure. Make
sure the strap is tight, secure, and parallel to the floor.
The LCD display panels are manufactured with extremely high-precision
technology techniques. However some non-active pixels may appear on
the screen or luminous spots may occur occasionally - this is not a sign
of a malfunction.
Note: The hook is only applicable to 26DV713B and 32DV713B.
Make sure that the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage
the screen, and that small items cannot be inserted into slots or openings of the case.
To display your LCD TV on the included pedestal stand
Observe the following safety precautions:
(1) Read and follow the pedestal assembly instructions included with the pedestal.
Caution: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down
on a flat, cushioned surfaces such as a quilt or blanket. Leave the bottom of the TV protruding over
the edge of the surface and assemble the pedestal as indicated below.
Note: Extreme care should always be taken when attaching the pedestal stand to avoid damage
to the LCD panel.
(2) Grab the pedestal stand and lift the display up. Confirm the pivot is locked.
(3) Place the TV on a sturdy, level surface that can support the weight of the TV.
(4) Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure. To secure the
TV in this manner: (1) attach a clip to an immovable structure, and then (2) pass a sturdy strap
through the clip and attach each end to the hooks located at the back of the TV. Be sure to leave at
least 10 cm between the TV and the wall or similar structure for ventilation.
To fold the pedestal stand
(1) Slide the lever on the back side of the
pedestal stand to the left.
(2) Lay the display down.
Applicable to the following models:
19DV713B, 19DV714B, 22DV713B, and
22DV714B.
Note: Do not operate the LCD TV when the pedestal stand is folded. The pedestal stand should not be folded at any time
except for packing purposes.
To display your LCD TV using a wall bracket
If you decide to wall mount your LCD TV, always use a wall bracket appropriate for the size and weight of the LCD TV
(1) Caution: Two people are required for installation.
(2) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are
attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.
(4) IMPORTANT: Always use the screws supplied or recommended by the wall mount manufacturer.
(5) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as
described below.
6
(continued)
Sturdy strap (as short as possible)
Side View
Slide the lever to the left
Back side of the pedestal stand
Clip
Hook
Screw
hole
Screw
Top View
:
Hide quick links:
Advertisement
Table of Contents
